Terms & Conditions

General Terms and Conditions of ICTWaarborg – B2B Version September 2018
These General Terms and Conditions govern the legal relationship between the Contractor and its Clients. The General Terms and Conditions have been divided into different modules focusing on the various forms of service provision offered by the Contractor.
They consist of the following modules:
Module A. General 3
Module C. Hosting / SaaS 11
Module D. Hardware 14
Module E. Telecom 15
Module F. Secondment 18
Module G. Hardware hire 20
Module H. Maintenance and support 22
Module I. Advice and courses 24
Where a specific module applies, it prevails over the General Module. To the extent the general section does not contravene the applicable provisions stipulated in the specific modules, the general section will always apply. The definitions of the terms written with a capital letter apply to all modules.
Definitions
In these General Terms and Conditions, the terms below have the following meanings:
Acceptance test: is a delineated compulsory test performed by the Client in order to round off the Project. General Terms and Conditions: these terms and conditions, which are made up of a number of modules. Service: the service to be supplied by the Contractor, including the development and/or maintenance of software, applications, etc. The Agreement specifies which Services are involved and these General Terms and Conditions set more detailed rules for specific Services.
Defect: failure to satisfy the Specifications.
User: the user or end user who uses the Service/Project provided by the Contractor on the Client’s behalf.
Hardware: equipment supplied by the Contractor to the Client.
Materials: for example, applications (web or other), software, advice or reports.
Employee: an employee, freelancer or self-employed worker without employees or an agent hired from a third party by the Contractor who are deployed by the Contractor for the benefit of the Client or who perform activities for the Client.
Module: a module of these General Terms and Conditions containing provisions relating to a specific area of activity.
Client: the natural person or legal entity with whom the Contractor has concluded an Agreement. This also means the party with whom the Contractor enters into or is currently conducting negotiations on the Agreement as well as its representative(s), authorised agent(s), the acquiring legal entities/person(s) and beneficiaries.
Contractor: the contractor, with its registered offices in Heesch and registered with the Chamber of Commerce under number 62706802 and a member of ICTWaarborg.
Agreement: the agreement between the Contractor and the Client.
Force Majeure: a shortcoming which cannot be attributed to the debtor, if it cannot be blamed for it, or if the shortcoming cannot be ascribed to the debtor under the law, legal transaction or by convention.
Project: the work carried out by the Contractor on behalf of the Client, as described in the quotation and/or Agreement.
Project Management System: electronic system that can be used for the management of the Project and for communication between the Contractor and the Client about the implementation of the Agreement.
Results: the results of the activities carried out by the Contractor under the Agreement.
In Writing: the term 'in Writing’ used in these General Terms and Conditions includes e-mail and fax communication, provided that the sender’s identity and the message integrity have been sufficiently established.
Specifications: the functional and technical description of the Project.
Website: https://www.mitservices.nl
Identity of Contractor
Name (Contractor)
MITServ B.V.
Operating as
M-IT Services
Registered address
Achterste Groes 6
5384 VG Heesch
Postal address
Achterste Groes 6
5384 VG Heesch
Telephone
0412-744300
E-mail
info@mitservices.nl
VAT number
NL854926598B01
CoC number
62706802
Module A. General‌
Article A.1. Quatation, offer and acceptance
A quotation drawn up by the Contractor is without obligation and will be valid for 14 days after the date on which it was sent by the Contractor, unless stated otherwise in the quotation.
The Client should preferably accept the quotation in Writing, but if the Client accepts or creates the impression that it has accepted it by other means, the Contractor may consider the quotation as accepted.
The Client's provisions or terms and conditions that differ from, or do not appear in, these General Terms and Conditions will only be binding for the Contractor if, and to the extent that, these have been explicitly accepted by the Contractor in Writing.
Without prejudice to the power of the Contractor to withdraw the quotation in accordance with Article A.1.1., the Agreement may only be changed after acceptance with the consent of both parties. In the event of a conflict between the provisions in the documents below, the following order of precedence applies:
1. the Agreement;
2. any appendices, apart from brochures;
3. these General Terms and Conditions;
4. any additional conditions, apart from brochures.
Article A.2. Implementation of the Project & provision of information
Following conclusion of the Agreement, the Client will carry out the Project as soon as possible, in accordance with the offer, taking into account any reasonable wishes of the Contractor.
The Contractor will endeavour to carry out the Project to the best of its ability, exercising due care and professionalism. The Client is obliged to enable the Project to be implemented correctly and in a timely manner. In particular, the Client shall ensure that all information, which the Contractor has stated to be required or with regard to which the Client can reasonably understand that it is required for the implementation of the Project, is made available to the Contractor in time. The necessary commitment on the part of the Client should be of adequate quality and timely. This applies both to the support provided by the contact persons and to the planned deployment of Project staff on the Project activities.
If the Client fails to do the above, the Contractor is entitled to charge extra costs and and it is possible that the Project will overrun. Any delay to the Project caused by the Client is reported via the Project Management System or, if no project management system is being used for the Project, by email, or, in the absence of functioning email correspondence, by another means in Writing. If this situation arises, the Contractor will inform the Client of any extra costs to be charged.
Article A.3. Term, termination and dissolution
The Agreement will be deemed as having been terminated if the services stipulated in it have been provided by both parties.
Contrary to Article 3.1, agreements for services are tacitly extended on a monthly basis after the end of the term. Such agreements are terminated in Writing.
The delivery dates given by the Contractor are always an indication only. In the event of an agreed final delivery date, the Contractor will first be in default after the Client has declared it to be in default in Writing, subject to the mandatory situations prescribed by law in which default occurs by operation of law.
If the Client fails to perform any obligation to which it is subject under the Agreement, the Contractor has the right to suspend performance of all agreements concluded with the Client concerned, without requiring notice of default or judicial intervention, and without prejudice to the Contractor's right to compensation, loss of profit and
interest, unless such non-fulfilment is of minor significance.
The Client shall be obliged to comply with all relevant legislation and the obligations arising from related regulations.
The Contractor has the power to dissolve or suspend the Agreement in full or in part with immediate effect, without judicial intervention, in Writing and without any obligation to pay compensation or grant indemnification, if:
the Client has not fulfilled the obligations stipulated in the Agreement in full, adequately or on time;
after having concluded the agreement, the Contractor learns of circumstances that provide every reason to fear that the Client will not fulfil its obligations;
when concluding the Agreement, the Client has been requested to provide security in order to fulfil its obligations under this Agreement, and such security has not been forthcoming or is inadequate;
due to delay on the Client's side, the Contractor can no longer be required to fulfil the Agreement under the terms and conditions originally agreed;
in the event of the death of the Client, or if an application is made for a moratorium on payments or a winding up order;
the Client’s business is wound up;
the Client’s activities are halted or wound up; any of the client’s assets are seized;
circumstances arise, the nature of which renders fulfilment of the Agreement impossible, or such that the Contractor cannot be reasonably required to maintain the Agreement unchanged.
Any claims owed by the Client to the Contractor shall become immediately due and payable upon dissolution of the Agreement. The Contractor suspending the fulfilment of the obligations does not affect its statutory rights or any entitlements under the Agreement.
If dissolution is attributable to the Client, the Contractor has the right to compensation for any damage/losses, arising either directly or indirectly as a result thereof.
Article A.4. Procedure upon termination of the Agreement
Upon termination of the Agreement, the parties are mutually obliged to immediately return any property in their possession which the other party owns or is entitled to. Certain goods, such as data (and data carriers) may be erased or destroyed instead of being returned, if the entitled party has given consent to this in Writing.
All data provided or entered by the Contractor remains its property at all times. The Client only receives a non-exclusive, transferable licence which is necessary to implement the Agreement.
Article A.5. Prices
Prices are exclusive of sales tax (VAT) and other duties levied by the government.
If a price in an offer is based on information provided by the Client and the information proves to be incorrect, the Contractor has the right to adjust the prices to reasonable prices based on the correct information, even after the Agreement has already been concluded.
All prices given in the quotation are subject to typing and calculation errors.
Article A.6. Terms of payment
The Contractor will send the Client an invoice for the amount payable by the Client. If the Project is delivered in phases, the Contractor is entitled to invoice at the completion of each phase, monthly or based on hours worked (at the Contractor's discretion). The payment term for invoices is within 14 days of the date of the invoice, unless agreed otherwise between the Contractor and the Client.
If the Client has failed to make the full payment in good time, effective 30 days after the payment term the Client will be held in default by operation of law without requiring notice of default. If an amount owed is not paid within the payment term, 2% per month and an administrative charge of EUR 15 will be payable on the outstanding amount without requiring any further notice of default from the Contractor.
In the event the Client fails to pay by the due date, the Client is obliged to pay any and all judicial and
extra-judicial collection costs, including the costs of lawyers, bailiffs and debt-collection agencies, in addition to the amount payable and the relevant interest due.
The amount due is payable immediately in the event the Client is put into involuntary liquidation, applies for a moratorium on payments or if the Client passes away, and also if the Client’s business is wound up or dissolved.
In the cases referred to above, the Contractor will also have the right to terminate or suspend implementation of the Agreement or any part thereof that has not yet been implemented without notice of default or judicial intervention being required, and without the Client being entitled to compensation.
Article A.7. Additional work
If the volume of work that the Contractor has to do under this Agreement increases as a result of the Client's requirements, which the Contractor could reasonably consider to be amendments or additions to what was set out in the quotation (including a delay or overrun of the Project attributable to the Client), this constitutes additional work.
If the Contractor is of the opinion that additional work is involved, it will notify the Client as soon as possible and request approval in Writing for the proposed additional work and for its offer including the delivery period.
The Client will always take the decision on proposed additional work within five (5) working days. The activities to be carried out as part of the accepted additional work will be put in Writing and approved by both parties.
The Client is responsible for any overrun of the delivery periods stipulated in the original quotation due to additional work.
The provisions of these General Terms and Conditions apply to all additional work to be carried out by the Contractor, in so far as the parties have not agreed any other terms and conditions.
Article A.8. Liability
For each event or series of related events, the Contractor’s liability for direct damage/losses incurred by the Client as a result of a culpable shortcoming in the Contractor fulfilling its obligations under the Agreement, which also expressly includes any shortcoming in fulfilling a guarantee commitment agreed with the Client, or an unlawful act on the part of the Contractor, its employees or third parties engaged by the Contractor, is limited to a sum equal to the payments the Client is obliged to make under this Agreement each year (excluding VAT). Under no circumstances however will the total compensation to be paid for any direct loss or damage exceed a sum of EUR 25,000 (excluding VAT).
The Contractor's total liability for damage/loss arising from death or physical injury or material damage to property will under no circumstances exceed a sum of EUR 500,000 for each event causing damage, in which case a series of related events counts as one event.
The Contractor's liability for indirect loss or damage, including consequential loss, loss of profit, lost savings, corruption or loss of data (business or otherwise), and losses due to business stagnation is excluded.
Except for the cases referred to in paragraphs 1 and 2 of this article, the Contractor will not be held liable for any damage/losses whatsoever, regardless of the grounds on which an action for compensation might be based. The exclusions and limitations referred to in this article cease to apply if and to the extent the damage or loss is a consequence of an intentional act or wilful recklessness on the part of the Contractor's management.
The Contractor's liability for an attributable failure to perform the Agreement will only arise if the Client immediately notifies the Contractor of its default in Writing, setting a reasonable period to remedy the failure, and the Contractor continues to culpably fail to perform its obligations even after that period. The notice of default should contain a description of the failure in as much detail as possible to enable the Contractor to respond adequately.
Any right to claim compensation will at all times be subject to the condition that the Client notifies the Contractor of the damage or loss in Writing within 30 days of it arising.
The Client will indemnify the Contractor against all third-party claims on account of liability resulting from a defect in the Project/Service provided by the Client to a third party, and which also comprised items, Materials or Results supplied by the Contractor, subject to and to the extent that the Client proves that the losses/damage were caused by those items, Materials or Results. The Client will indemnify the Contractor against claims concerning non-compliance with licences by the Client and/or third parties (including Users) that fall under the Client’s responsibility.
Contractor liability for shortcomings in the products and Services of third parties, including software, is expressly ruled out.
Article A.9. Failures and Force Majeure
Neither party may be bound to perform any obligation if a circumstance beyond the parties’ control that could not or should not have already been predicted when concluding the Agreement negates every reasonable opportunity to perform. The parties can only invoke Force Majeure in dealings with each other, if, as soon as possible after the occurrence of the shortcoming, the party affected informs the other party in Writing that it is invoking Force Majeure and submits the necessary documentary evidence.
The circumstances envisaged in paragraph 1 could, for example, consist of: (a) failures of the Internet or other telecommunication facilities; (b) shortcomings by parties on whom the Contractor depends for providing the Services; (c) defective items, Hardware, software or Materials, which the Client has obliged the Contractor to use;
(d) the non-availability of one or more staff members (due to illness or otherwise); and (e) government measures.
In the event of Force Majeure, fulfilment of the obligations concerned and other associated obligations will be suspended in part or in full for the duration of such a Force Majeure situation without the parties being liable to pay each other any compensation. The parties can only invoke Force Majeure in dealings with each other, if, as soon as possible after the occurrence of the shortcoming, the party affected informs the other party in Writing that it is invoking Force Majeure and submits documentary evidence.
In the event of Force Majeure, the party that has invoked Force Majeure shall endeavour to ensure that the shortcoming which is exculpated by the Force Majeure continues for as short a period as possible.
If a Force Majeure situation has lasted for thirty (30) days, or as soon as it is certain that the Force Majeure situation will continue for more than three months, each party has the right to terminate the Agreement in Writing, unless the nature or scope of the shortcoming would not justify premature termination. In such an event, that which has already been performed under the Agreement shall be paid for on a proportional basis without the parties owing each other anything else.
Article A.10. Intellectual property rights
The Contractor or its licensors hold all intellectual property rights to all of the Materials developed or made available within the context of the Project.
The Client will acquire the exclusive user rights and powers explicitly assigned in Writing under these General Terms and Conditions, the Agreement or otherwise, and in all other respects the Client will not reproduce or publish the software, Services or other Materials.
The Client is not permitted to remove or modify any markings relating to copyrights, trademarks, trade names or other intellectual property rights from the Materials, including markings relating to the confidential nature and secrecy of the Materials.
The Contractor is permitted to take technical measures to protect the Materials, for example with passwords or encryption. If the Contractor has used technical measures to protect the Materials, the Client is not permitted to remove or circumvent the relevant protection.
Any use, reproduction, or publication of the Materials falling outside the scope of the Agreement or the rights of use granted will infringe the intellectual property of the Contractor or its licensors.
The Client will pay the Contractor a penalty of EUR 5,000 due and payable immediately for each act of infringement and EUR 25,000 for each deliberate act of infringement, without prejudice to the Contractor’s right to receive compensation for the damage/losses it incurs as a result of the infringement or to allow other legal action to be taken for the purpose of terminating the infringement and/or recovering the damage/losses. After the elapse of one working day after the Contractor has informed the Client of an infringement, a penalty of EUR 5,000 will also be payable by the Client for each day that the infringement has not been brought to an end.
Article A.11. Processing personal details
If, in performing the Services, the Contractor is to process personal data, under the General Data Protection Regulation ("GDPR"), the Contractor and the Client are required to assume obligations in respect of the data processed by the Contractor for the purpose of safeguarding the technical and organisational protection measures pertaining to the data to be processed. In the absence of a separately agreed, detailed ‘data
processing agreement’ the provisions set out in this article apply as obligations within the meaning of the GDPR.
For duration of the Agreement, Contractor solely processes the personal data under the supervision of Client and solely for the purpose of making available its Services. Client shall be regarded as the controller, and Contractor as the processor.
The personal data, of the data subjects, that can be processed by Contractor in this regard, are further specified within the Agreement.
In case, within the meaning of these General Terms and Conditions, or within the Agreement, the Wbp is referred to, from the 25th of May 2018 onwards, the corresponding provisions of the General Data Protection Regulation ("GDPR") are meant.
The Contractor shall, to the best of its ability, make reasonable efforts to have sufficient technical and organisational measures in place with regard to the processing of personal data, and will endeavour to meet the security at a level that is not unreasonable, considered the state of the technology, the sensitivity of the data and the costs involved in making the security arrangements.
The Contractor shall ensure that all persons acting under its authority, insofar as they have access to personal data from Client, will only process such personal data on the Client's instructions.
The Contractor is allowed to process the personal data in countries within the European Union. In addition, Client grants Contractor its approval to process the personal data within a country outside the European Union, in compliance with the relevant applicable laws and regulations. Upon request, Contractor shall notify Client as to which country or countries outside the European Union the personal data is being processed in.
Client, hereby, grants Contractor its approval to engage third parties for the processing of personal for performance of the Services, considering the relevant applicable laws and regulations. Upon request of Client, Contractor shall in any event ensure that such third parties will be obliged to agree in writing to the same duties that are agreed upon between Client and Contractor, and will take care of correct authorizations. Contractor shall inform Client upon request about the third parties engaged. Client has the right to object against any, by Contractor, engaged, third parties. In case of objection by Client, Client and Contractor will try to come to an agreement to solve this situation.
The Client guarantees and warrants that it will enter personal data or otherwise make it available to the Contractor only in a manner that is fully compliant with the applicable laws and regulations and does not infringe any rights of a third party. In this context, Client indemnifies Contractor of all claims and actions related to the processing of personal data.
If the Client is required by a legal obligation or exercise of the legal rights by one of the data subjects, to extract, adjust, transfer, delete or hand over personal data stored in the Contractor’s systems, the Contractor will facilitate this activity to the best possible extent. The costs for the relevant activities may be invoiced separately. Where a data subject directly submits a request to Contractor to exercise one of its legal rights, Contractor will forward this request to Client. Client will then deal with this request independently.
Client has the right to conduct an audit, by an independent third party who shall be bound to confidentiality, to control compliance of Contractor with this article A.11. This audit may only be undertaken when there are specific grounds for suspecting the misuse of personal data by Contractor. The by Client initiated audit, will take place two weeks after Client has provided Contractor with written notice about this. The costs of the audit will be borne by Client.
All personal data received by Contractor from Client and/or compiled by Contractor for performance of the Services is subject to a duty of confidentiality vis-à-vis third parties. This duty of confidentiality will not apply in the event that Client has expressly authorised the furnishing of such information to third parties, where the furnishing of the information to third parties is reasonably necessary for performance of the Services, or if there is a legal obligation to make the information available to a third party. If Contractor is legally required to provide information to a third party, Contractor shall inform Client of this immediately to the extent permitted by law.
The Client, as the controller within the meaning of the GDPR, is at all times responsible for reporting a data breach (by which is meant: a security breach of personal data that leads to a serious risk of adverse effects, or has serious negative consequences for the protection of personal data) to the relevant supervisory authority(ies) and/or the data subjects. In order to enable the Client to comply with this legal obligation, the Contractor shall inform the Client as soon as possible and ultimately within forty-eight (48) hours after discovery of the data breach. If there is any legal obligation or requirement for Contractor to assist Client, Contractor will assist Client in informing the relevant supervisory authority and/or data subjects.
The duty to report the data breach includes in any event the duty to report the fact that a breach has occurred including, for as far as known by Contractor, the following details:
the date at which the breach has occurred (the period in which the breach occurred suffices in case the Contractor is unable to determine the exact date at which the breach occurred);
the (suspected) cause of the breach;
the date at which the breach has become known by Contractor, or by any engaged third party;
the number of individuals who are or may be affected by the breach (a minimum and maximum number of affected individuals suffices in case the exact number cannot be determined);
a description of the group of individuals who are or may be affected by the data breach, including the type of personal information which has been breached;
whether the personal data has been encrypted, hashed or in any manner has been made incomprehensible or inaccessible to unauthorized individuals;
the proposed and or taken measures to end the breach and to limit its consequences;
information about the first point of contact regarding the notification.
Upon expiration of the Agreement, Contractor shall delete or return the personal data referred to in this article A.11.3, upon choosing of Client.
Article A.12. Staff
Where an Employee has to perform activities at the Client’s site for the performance of the Agreement (unlike where the Client and the Contractor enter into an Agreement for the secondment of an Employee), the following provisions shall apply.
The Client shall provide the Contractor’s Employee who, for the purposes of performing the Agreement, is performing activities at the Client’s site, with all the support necessary for the performance of the activities. The Client shall be obliged to do everything that is necessary to enable the Employee to carry out his work properly and safely.
The Contractor shall undertake to ensure that the Employee has the correct job description and skills. The Client may not select specific Employees unless this has been agreed expressly. The Contractor shall be entitled to exchange an Employee for an Employee with comparable skills and a comparable job description.
The Client may not limit access to certain Employees only. Nor is there any guarantee that the Client will be able to have a permanent team of Employees, where such is relevant.
During the term of the Agreement and for two (2) years after its end, the Client shall not be permitted to employ Employees of the Contractor, enter into direct or indirect business relationships with them or arrange for them to perform activities other than within the framework of the Agreement without the Written consent of the Contractor, such being subject to a contractual penalty due and payable immediately of €10,000 per breach, plus
€500 for each day that this breach continues, which penalty amounts shall be payable to the Contractor. This article shall also apply where the Client and Contractor have entered into an agreement for the secondment of an Employee.
Article A.13. Confidentiality
The Parties will treat the information they provide each other before, during or after the performance of this Agreement as confidential, if such information has been marked as confidential or if the recipient party is aware or should reasonably assume that the information is intended to be confidential. The Parties will also impose this obligation on their employees as well as on any third parties they have engaged to perform the Agreement.
The Contractor will not access the information stored by the Client and/or distributed via the Contractor’s Services unless this is required for the proper performance of the Agreement or for the quality of the Projects, or if the Contractor is obliged to do so pursuant to a legal provision or an injunction. In that case, the Contractor will undertake to limit access to the information as far as possible, to the extent that this is within its power.
This obligation remains in force after termination of the Agreement irrespective of the reason, and for as long as the party providing the information can reasonably claim that the information is confidential.
Article A.14. Amendments to the General Terms and Conditions
In the case of a continuing performance agreement, the Contractor reserves the right to amend or supplement the General Terms and Conditions and all Modules contained therein.
Amendments also apply to agreements already concluded with due observance of a term of 30 days following publication of the amendment on Contractor’s Website or by electronic communication. Minor changes can be implemented at any time.
If the Client is a natural person who is not acting in the course of a profession or the operation of a business and, as a result of the amendment, the Client is provided with a service that substantially differs from the original service, the Client shall be entitled to terminate the Agreement as of the date on which the amended Terms and Conditions come into effect.
Article A.15. Settlement of disputes
The Agreement, as well as any agreements and other legal acts arising from it or related to it, are exclusively governed by Dutch law.
All disputes, including those which are only deemed by one party to be a dispute, which arise from or are connected with this Agreement and its implementation and/or with other agreements ensuing from or related to this Agreement will be settled through the mediation offered by ICTWaarborg (hereinafter referred to in this article as Mediation).
The parties undertake to cooperate with each other on settling disputes through Mediation and commit themselves to each bearing half of the Mediation costs.
Mediation comprises two phases. In the first phase the parties seek a possible solution with which they can both agree. If agreement can be reached, the mediator will put that which has been agreed into a settlement agreement. If it proves impossible to reach an agreement that is acceptable to both parties in the first phase, the process will go into a second phase. In the second phase the mediator will work out an agreement that is binding upon both parties and then set this out in a settlement agreement.
Parties shall at all times have the right to submit their disputes to the legally competent Dutch court, however, only when both Parties give their explicit written prior consent and agree to refrain from Mediation.
Article A.16. Concluding provisions - General Module
If any provisions in this Agreement are declared null and void, the validity of the Agreement as a whole shall remain unaffected. In such case, for the purpose of replacing any such provisions the Parties will stipulate a new provision or new provisions reflecting the purport of the original Agreement and the General Terms and Conditions as far as possible on a legal basis.
If disputes arise from this Agreement which cannot be settled through the settlement arrangements, they will be brought before the competent court in Amsterdam.
Information and notices on the Contractor's Website may be subject to errors.
The version of any communications received or stored by the Contractor (including log files) shall be regarded as authentic, subject to proof to the contrary to be produced by the Client.
For the purpose of promoting its services, the Contractor has the right to show third parties which Projects it provides the Client, unless reasonable interests on the Client's part render this unacceptable or it has been agreed otherwise in Writing.
The Contractor has the right at all times to engage third parties in performing the Agreement.
The Contractor and the Client may transfer their rights and obligations under the Agreement to third parties, provided the other party consents to the transfer in Writing beforehand.
Module C. Hosting / SaaS
This module applies to the data and/or applications/web applications made available and retained as such (hosting) by the Contractor to the Client ‘remotely’ via the Internet or another network (known as hosting), without providing the Client with a physical carrier with the relevant software. This includes the registration and management of domain names.
Article C.1. Execution
Following conclusion of the Agreement, the Contractor will perform the Service as soon as possible, in accordance with the offer, taking into account any reasonable wishes of the Client.
The Agreement specifies when the Contractor will start with the installation of the application/web application.
The Contractor will endeavour to ensure that the application/web application can be ideally configured and managed, exercising due care and professionalism.
The Client is obliged to do and arrange for third parties to do everything that is necessary to enable the application/web application to be installed correctly and on time. In particular, the Client will ensure that all data and facilities which the Contractor indicates are necessary, or which the Client should reasonably understand are necessary, for the installation of the application/web application are provided to the Contractor in good time.
Article C.2. Term of the agreement
C.2.1 The Agreement is entered into by the Client for a minimum term of twelve (12) months. After that the Agreement will be continued indefinitely. At the end of the minimum term, the Agreement may be terminated by either party giving notice of at least one (1) month. Notice to terminate the Agreement given by either the Client or the Contractor must be given in Writing.
Article C.3. Rules of conduct
The Client will refrain from storing and/or distributing or commissioning the distribution of material in contravention of the provisions of Dutch law, in any case including but not confined to: material that is insulting, defamatory, offensive, racist, discriminatory or that incites hatred; material that is erotic or pornographic (unless explicitly permitted in the offer); material that infringes third-party rights, in any case including but not confined to copyright, trademark rights and portrait rights; material that violates the privacy of third parties, in any case including but not confined to distributing third-party personal data without permission or necessity, or repeatedly harassing third parties with unwanted communications, hyperlinks, torrents or similar information of which the Client is aware or should be aware that it concerns to material that infringes third-party rights, contains unsolicited commercial, charity-related or ideals-related communications, or contains malicious content, such as viruses or spyware.
The Client will refrain from obstructing other clients or Internet users or inflicting damage on the Contractor's servers. The Client is prohibited from starting up processes or programs via the server or otherwise of which the Client is aware or can reasonably assume that these will obstruct or inflict damage on the Contractor, other clients or Internet users.
The Contractor will advise the Client of any measures taken.
In addition to the legal obligations, any damage arising as a result of incompetence on the Client’s part, or as a result of the Client not acting in accordance with the points stated above will be payable by the Client.
To prevent the aforementioned problems such as damage and security risks, the Contractor is entitled at its own discretion to restrict the Client's management capabilities so that all management is carried out by the Contractor.
Article C.4. License
C.4.1 The Client hereby grants the Contractor an unlimited licence to distribute, store, forward or copy all Materials supplied by the Client for the Contractor's Services, in a manner deemed appropriate by the Contractor, but solely to the extent this is reasonably required for the Contractor to fulfil the Agreement.
Article C.5. Indemnification
The Client indemnifies the Contractor against all legal claims made by third parties relating to the use of the Services by the Client. The Contractor is not responsible for data/Services/software called via a link.
If, pursuant to an authorised order from a government agency, or in connection with a legal obligation, the Contractor is required to perform activities involving information relating to the Client, its employees or Users, all costs attached to these activities will be chargeable to the Client.
Article C.6. Provisions of services and availability
All of the Contractor's Services will be performed on the basis of a best-efforts obligation, unless and to the extent that the Contractor has pledged an explicit result in the Agreement and the relevant result has also been adequately described.
Electronic transmission of the Client's data as part of the Services, by whatever method, is for the Client's account and risk.
The Contractor is never obliged to also provide the Client with a physical data carrier (for instance a CD or USB stick) containing the remote applications that it has made available.
If the Services are (also) provided via the Contractor's Services and/or networks, the Contractor will undertake to ensure that downtime is kept to a minimum.
The Contractor provides no guarantee of the exact amount of uptime unless otherwise agreed in the offer by means of an SLA in which uptime is specified. To the extent not provided for otherwise in an applicable SLA, the provisions of this article apply.
Subject to proof of the contrary, the availability and service levels measured by the Contractor will serve as complete proof.
The Contractor will undertake to ensure that the Client can make use of the networks that are either directly or indirectly connected to the Contractor's network. However, the Contractor cannot guarantee that these networks will be available at any particular time. Legal and contractual conditions may be attached to use of networks by third parties. The Contractor will undertake to inform the Client of this in good time.
If, in the Contractor's opinion, the functioning of the Services, the Contractor's network, third-party networks and/or service provision via a network is at risk, in particular as a result of sending excessive amounts of e-mail or other data, inadequately protected Services or activities of viruses, Trojan horses and similar software, the Contractor has the right to take all reasonable measures it deems necessary to prevent such risk.
The Contractor has the right to take the Services or parts thereof temporarily out of operation for the purpose of maintenance, adjustment or improvement. The Contractor will endeavour to ensure that as far as possible any such period of inactivity only takes place outside office hours, and will undertake to inform the Client in good time of the scheduling of periods of inactivity. However, the Contractor is never obliged to pay compensation for any damage/loss arising from taking the Services out of operation for the above purposes unless expressly agreed otherwise in Writing, for instance in an SLA.
The Contractor is only obliged to have an alternative centre or other alternative facilities at its disposal if expressly agreed in Writing.
Unless provided for otherwise in the Agreement, the Contractor is not obliged to make copies (backups) of the data stored by the Client on the Contractor's Services. Any backups made may be destroyed at any time after termination of the Agreement. It is the Client's responsibility to request a backup in the event the Agreement is terminated or dissolved.
Article C.7. Changes
C.7.1 The Contractor has the right to adapt the applications made available as it sees fit throughout the duration of the Agreement. If an adjustment causes a considerable change in functionality, the Contractor will undertake to inform the Client of this. The Client may continue to use an older version of the application on request, only if this is technically feasible and does not require a disproportionate effort on the part of the Contractor.
The Contractor may charge additional costs for providing this option.
Article C.8. Storage and data limits
C.8.1 The Contractor may impose a maximum limit on the amount of storage space or data traffic the Client may use each month within the framework of the Service. The Client will not exceed the limits unless the consequences thereof are expressly laid down in the Agreement. In the event this maximum is exceeded, the Contractor is authorised to charge an additional amount in accordance with the amounts charged for additional storage space or data traffic as specified in the Agreement. If no storage and/or data limits have been agreed, the Contractor's fair use policy applies.
Article C.9. Procedure upon termination of the Agreement
C.9.1 The Contractor will ensure that, upon termination of the Agreement, the Client is given a reasonable opportunity to transfer its data that are stored in the Contractor's systems to its own systems or to the systems of a new supplier. To this end, the Contractor will endeavour to be able to provide the data in a standard file format.
Module D. Hardware
This Module applies to Contractors who supply Hardware to Clients.
Article D.1. Delivery and ownership
Hardware is delivered to the Client when it is delivered to the delivery address specified by the Client in the order and the delivery is accepted by the Client.
As far as is reasonably possible at that point in time, the Client is obliged to check the Hardware for Defects.
Ownership of the Hardware passes from the Contractor (or its suppliers) to the Client at the time of delivery to the delivery address specified by the Client but only if the Client has paid for the Hardware in full.
Article D.2. Guarantee
The Contractor guarantees the operation of the supplied Hardware in accordance with the specifications notified to the Client in advance for 1 year after delivery, and is accountable to the Client for this.
If the manufacturers of the supplied Hardware have specific guarantee schemes which are longer than that given by the Contractor, they remain valid and the Contractor remains responsible for dealing correctly with the Hardware covered by those guarantees.
The guarantees given by the Contractor and manufacturers does not affect the statutory guarantee period applicable to Hardware.
The guarantee on Hardware lapses in the event of unauthorised modification, failure to follow the instructions for use or other careless use of the Hardware by the Client.
If the Client makes use of the guarantee within the set periods and within the rules, the Contractor will endeavour to arrange for the Hardware to be repaired or replaced as soon as possible, but no later than 30 days after receipt in the proper manner of the returned Hardware.
The Client is not liable for the loss of data resulting from the repair or replacement of Hardware.
Article D.3. Returns
If the Client makes use of the guarantee, it will return the supplied Hardware and all accessories to the Contractor in their original condition at the time of delivery as far as possible.
If there are costs associated with returns under the guarantee, they are payable by the Client.
Module E. Telecom
This Module applies to Contractors who provide telephony services over a computer network and related services such as (X)DSL and VOIP.
Article E.1. Execution
Following conclusion of the Agreement, the Contractor will perform the Service as soon as possible, in accordance with the offer, taking into account any reasonable wishes of the Client.
Contractor may, if desired and for a fee, deliver equipment for the purpose of using the Service. Client shall at all times remain responsible for the equipment as well as its configuration.
The Client is not permitted to sublease the Service referred to in this Module or otherwise to make it available to third parties, without permission in Writing from the Contractor.
Article E.2. Term of the Agreement
The Agreement shall be entered into by the Client for a period of twelve (12) months. Hereafter, the Agreement shall be renewed automatically until notice of termination is given.
The Agreement may be terminated by the Client before the end of the period subject to one (1) month’s notice. Following an automatic renewal, the Client may terminate at any time subject to one (1) month’s notice. A notice period of three (3) months shall apply to the Contractor.
Notice to terminate the Agreement given by either the Client or the Contractor must be given in Writing.
Where the Client has made advance payments for a specific period, but the Agreement has been terminated in accordance with article E.2.2., the Contractor shall repay the Client any sums paid in advance on a pro rata basis.
Article E.3. Provision of services and availability
All of the Contractor's Services will be performed on the basis of a best-efforts obligation, unless and to the extent that the Contractor has pledged an explicit result in the Agreement and the relevant result has also been adequately described.
The Contractor provides no guarantee of the exact amount of availability unless otherwise agreed in the offer by means of a Service Level Agreement (SLA). To the extent not provided for otherwise in an applicable SLA, the provisions of this article apply.
Subject to proof of the contrary, the availability and service levels measured by the Contractor will serve as complete proof.
The Contractor will undertake to ensure that the Client can make use of the networks that are either directly or indirectly connected to the Contractor's network. Legal and contractual conditions may be attached to use of networks by third parties. The Contractor will undertake to inform the Client of this in good time.
The availability and quality of the Service is partly dependent on certain external factors, such as the Client's Internet connection, if, for example, a VOIP service is purchased. The Contractor should follow the Client's guidelines with respect to these external factors.
Article E.4. Maintenance
The Contractor has the right to take the Services or parts thereof temporarily out of operation for the purpose of maintenance, adjustment or improvement. The Contractor will endeavour to ensure that as far as possible any such period of inactivity only takes place outside office hours, and will undertake to inform the Client in good time of the scheduling of periods of inactivity. However, the Contractor is never obliged to pay compensation for any damage/loss arising from taking the Services out of operation for the above purposes unless expressly agreed otherwise in Writing, for instance in an SLA.
The Contractor is only obliged to have an alternative centre or other alternative facilities at its disposal if expressly agreed in Writing.
The Contractor is entitled to modify the operation and technical specifications of the Service at any time in the interest of the continuation of the Service. The Contractor will inform the Client of these changes in good time, unless such is not reasonably possible. The Contractor is not liable for the damage/loss arising from these changes.
Article E.5. Usage and costs
The Client will use the Service properly. If agreed, the Contractor is entitled to charge the Client for excessive use of the Service.
The Contractor may set a maximum number of call minutes that the Client may use per month as part of the Service. In the event this maximum is exceeded, the Contractor is entitled to apply additional charges/consumption charges in accordance with the amounts charged for extra call minutes set out in the quotation.
The Client will be charged separately for extra call minutes or extra costs associated with the Service which will be itemised.
If Contractor has not imposed a maximum limit on the amount of call minutes that the Client may use each month as part of the Service, a ‘Fair Use Policy’ applies. In that case, a reasonable amount of call minutes,
based on the on the average use of all clients, will be established. In the event this amount is exceeded more than once, the Contractor shall contact the Client in order to reach a reasonable solution, such as a higher rate.
The Contractor has the right to change the charges for use of the Service from time to time. Changes will be notified to the Client in Writing at least 30 days in advance. The Contractor may apply price increases of 3% or less no more than once a year in the month of January without the Client's consent. In the event of price increases of more than 3%, the Client has the right to terminate the Agreement on the date that the new prices will take effect. The Contractor will notify the Client of price changes 30 days before they take effect.
Article E.6. Number management
The Client has the option to choose a new telephone number for the Service, which may or may not be tied to a geographical area, or to migrate a telephone number from an agreement with a third party.
The Client will follow the Contractor's instructions as far as possible in order to keep its number. The Contractor is entitled to charge the Client a one-off fee to keep its number. The Contractor is not liable for the termination of current agreements with a third party relating to the telephone number in question.
Where applicable, the Client will declare that it will only use a geographical telephone number in the geographical area for which this number is intended. The Client indemnifies the Contractor against all possible consequences of failure to comply with this.
If, for the proper functioning of the Service or to comply with laws and regulations the Contractor deems this necessary, the Contractor has the right to change the Client's telephone number. The Contractor will take the Client's interest into consideration as much as possible in doing this. However, the Contractor is not obliged to pay compensation for the change.
Upon termination of the Agreement, the Client loses the telephone number, unless it decides to keep the number and transfer it to a third party.
Article E.7. Personal details
For the purpose of executing the Agreement personal details are processed. These personal details are necessary for the proper functioning of the Service. These personal details are not shared with third parties, unless this is necessary for the performance of the Agreement or is required by law.
The Contractor will not store personal details longer than is necessary and is responsible for appropriate technical and organisational security measures to protect personal details against improper access and use.
The Contractor will cooperate with requests addressed to it by competent (including government) bodies to release the Client's personal details or to allow inspection of the Client's telephone calls in realtime or otherwise.
The provisions of the Articles A.11.6 and A.11.7 shall apply mutatis mutandis.
Module F. Secondment
This Module shall apply to Contractors seconding Employees to Clients’ premises.
Article F.1. Seconding Employees
Where necessary for the performance of the Agreement, an Employee will perform activities at the Client’s premises. The Agreement (‘Secondment Agreement’) contains specific provisions concerning, among other things, the activities to be performed, the duration and the price.
The Contractor shall place the Employee designated in the Agreement at the disposal of the Client to perform activities as agreed between the parties under the Client’s direction and supervision.
The Client shall use the Employee only for the agreed activities within the Client’s company.
The secondment of an Employee by the Client to a third party shall be permitted only after Written consent has been given by the Contractor. The Contractor may withhold consent without giving any specific justification for doing so, or attach (financial) conditions to any such secondment.
The Contractor shall undertake to ensure that the posted Employee has the correct job description and skills. The Client may not select specific Employees unless this has been agreed expressly. The Contractor shall be entitled to exchange an Employee for an Employee with comparable skills and a comparable job description.
The Client shall be entitled to request the replacement of the posted Employee where the Employee does not meet the job description or quality requirements and/or lacks the correct skills, at least not as agreed between the parties. The Client shall send any such request in Writing, accompanied by reasons, to the Contractor within five (5) working days after commencement of the activities by the Employee.
In the event of sickness lasting (expected to last) more than five (5) working days, or termination of the Employee’s employment, the Contractor shall try to arrange a suitable replacement within a reasonable time.
The Contractor shall deal with the provisions set out in the previous two articles concerning a replacement as a matter of urgency. The Contractor does not guarantee that a replacement will always be possible. Where a replacement is not possible, or is not wholly or immediately possible, the Client’s claims in respect of further performance of the Agreement, including claims for non-performance of the Agreement, shall lapse. The Client’s payment obligations with regard to the activities already performed shall remain unaffected.
Article F.2. Terms and conditions of employment
The Employee shall comply with the Client’s instructions and house rules.
The Client shall behave towards and treat the posted Employee in the same way as it would or does behave towards and treat its own employees and/or staff.
The Client shall be obliged to comply with all relevant legislation and to meet the obligations arising from related regulations in the area of safety at work and good working conditions in general.
Article F.3. Responsible parties
The Contractor shall be responsible for the payment of the income tax and national insurance contributions and turnover tax payable for the posted Employee. The Contractor shall indemnify the Client against all claims from the Tax and Customs Administration and/or agencies responsible for the implementation of social security legislation which are due and payable on account of the Agreement with the Client. The Client shall always notify the Contractor in Writing as soon as possible where any such claim exists.
F.3.2 The Contractor shall accept no liability for the selection of the posted Employee and/or for the results of activities effected under the supervision and direction of the Client, unless the Contractor has knowingly failed
to implement the provisions set out in article F.1.5.
F.3.3 The Client shall be liable for all damage suffered by the posted Employee during or in connection with the activities assigned to him.
The Client shall indemnify the Contractor against any damage the Contractor may suffer as a result of the claims of third parties, including claims of the posted Employees and those of persons employed under the responsibility of the Contractor which are connected to the goods supplied or activities performed by the Contractor, including:
damage which is the result of the unlawful actions of the Contractor’s posted Employee and persons working under the responsibility of the Contractor and who were placed at the disposal of the Client and are working under its supervision or on its instructions;
damage which is the result of unsafe situations at its company, residential premises or other place at which the Agreement is performed, or of actions or omissions on the part of the Client, including giving its own interpretation to, and/or misusing knowledge and information provided by the Contractor and products and items supplied by the Contractor;
damage which is the result of a defect in items supplied by the Contractor which have been used, changed or resold by the Client with the addition of or in conjunction with own products, software or Services of the Client, unless the Client proves that the defect is not the result of any use, change or reselling as referred to above.
Article F.4. Confidentiality
The Client may impose confidentiality on the Employee with regard to all information acquired by the Employee.
The provisions of the previous article shall apply by analogy where there is a situation in which the Employee is transferred. The Client shall be obliged to include the same conditions in any onward hire sub-agreement.
Module G. Hardware hire
This Module applies to Contractors leasing Hardware to Clients.
Article G.1. Supply
Hardware is supplied to the Client when it is delivered to the delivery address specified by the Client in the order and that delivery is accepted by the Client.
Unless agreed otherwise in Writing, provision of the consumables required for use of the Hardware shall not be included in the leasing of the Hardware.
Hardware shall be supplied without software, licences, etc. Where software, etc. is supplied in addition to the Hardware (for the same period as the lease), the Agreement shall state clearly which user rights the Client is receiving, which components this concerns, and under which conditions they are being additionally supplied.
The Client shall be obliged to check the Hardware for defects when it is delivered provided such is reasonably possible at that time. Unless defects are reported within 72 hours of delivery, the Hardware shall be deemed to have been duly received, defect-free by the Client.
The Contractor may oblige the Client to cooperate in an inspection of the supplied items. Following an inspection completed with a positive outcome, the Hardware shall be placed at the disposal of the Client. A report of the inspection may be drawn up.
The Client shall install the hardware itself unless the parties have agreed otherwise in Writing.
Article G.2. Term and termination
G.2.1 The Agreement shall be entered into by the Client for a minimum term of twelve (12) months. Hereafter the Agreement shall be continued indefinitely. At the end of the minimum term, the Agreement may be terminated by either party giving at least one (1) month’s notice. Notice to terminate the Agreement given by either the Client or the Contractor must be given in Writing.
Article G.3. Use
The Client may use the Hardware only within its own company and for the purpose for which the Hardware is intended.
The Client shall not be permitted to sub-lease the Hardware or otherwise place it at the disposal of third parties without the Written consent of the Contractor. The Client shall never use (part of) the Hardware as security or collateral, by whatever method, in respect of third parties.
The Client shall use the Hardware in a manner as befits a good borrower. It shall treat the Hardware with care, take precautionary measures and follow all instructions as supplied with the Hardware or given by the Contractor.
Where the Client discovers defects in the Hardware it must report such in Writing to the Contractor without delay.
The Client shall be fully liable towards the Contractor for damage to the Hardware that has arisen other than as a result of normally to be expected use. The Client shall always report any damage immediately and in Writing to the Contractor.
The Client may not adjust or change the Hardware other than with the Written consent of the Contractor unless these are changes and additions which can be reversed and removed at the end of the lease period without appreciable costs. The Client shall be obliged to reverse the latter adjustments and changes.
The Client shall be entitled at all times to refuse the consent referred to in the previous paragraph or to attach conditions to its consent. The Client shall also be entitled to increase the payment agreed for the hire of the Hardware where an adjustment or change justifies such.
Damage caused to the Hardware as a result of adjustments and changes shall never be damage for which the Contractor is responsible, as defined in Book 7, Article 204 of the Civil Code.
The Client shall be obliged to report any attachment on the Hardware to the Contractor immediately, in the process sending as much information as possible, including, in any event, the identity of the party making the attachment and the reason for the attachment. In addition, the Client shall be obliged to allow the party making the attachment to examine the Agreement or lease Agreement.
Article G.4. Contractor’s obligations
The Contractor shall remedy defects within a reasonable period unless such is impossible or requires expenditure which cannot reasonably be required of the Contractor in the given circumstances.
The Contractor shall not remedy defects where these are defects which:
were accepted by the Client when the lease agreement was entered into;
arose as as result of other than normal use and/or through the actions of the Client, its staff or visitors to its site;
were the consequence of careless, improper or injudicious use of the Hardware or use that is contrary to the rules, documentation, etc.;
were the consequence of use that is contrary to article G.3.
Where the Contractor later remedies a defect as referred to in the previous paragraph, it shall be entitled to charge the costs thereof to the Client.
The Contractor shall be entitled also to exchange the Hardware for a new or comparable version instead of remedying a defect.
The Contractor shall be entitled to perform preventive maintenance on the Hardware. The Client shall be obliged to cooperate in this maintenance. The parties shall consult in advance to determine a date and time for maintenance. The Client shall not be entitled to replacement Hardware during the period of maintenance.
Article G.5. Termination
The Client shall be obliged to return the Hardware to the Contractor when the Agreement is terminated. Any costs for the transport of the Hardware from the Client to the Contractor shall be borne by the Client.
If the parties draw up a report in respect of delivery (as referred to in article G.1.5), the Client shall be obliged to deliver the Hardware in the same condition in which it was accepted according to the description, with the exception of permitted changes and additions and wear or defects which have arisen as a result of normal use. If no report is drawn up, the Client (unless the Contractor proves otherwise) shall be assumed to have accepted the Hardware in the condition it was in at the end of the Agreement.
The Contractor may oblige the Client to cooperate in a final inspection. If the Client refuses to cooperate, the Contractor may conduct the final inspection as being the final inspection conducted with the approval of both parties.
If the Contractor identifies defects during the final inspection for which the Contractor, as lender is not responsible, the Contractor shall charge the Client the costs for remedying and/or replacement. The Client shall always have the right to refute that costs’ claim by proving that any defects and damage are the result of normal wear, depreciation and use of the Hardware.
In the event of termination, the Client shall be personally responsible for transferring its data, making
back-ups, etc. Unless agreed otherwise, the Contractor shall offer no opportunity to have any data that might still remain on the Hardware sent to the Client after the Hardware has been returned.
Module H. Maintenance and Support
This Module applies to Services comprising the installation, configuration and/or maintenance of Materials and Services such as software, applications, websites, etc.
Article H.1. Implementation
Maintenance shall mean ensuring the functioning of existing or new (newly developed) Materials in accordance with the offer or more detailed agreement, and more generally the remedying of defects. Support shall mean offering assistance, whether or not remotely, with the maintenance of the Materials or working with them.
Once the Agreement is concluded, the Contractor shall carry out the activities as soon as possible, in accordance with the offer, taking into account any reasonable wishes of the Client.
The Agreement specifies the remuneration the Contractor will receive when it starts to perform the Services and activities. There may be fixed fees, but also activities based on hourly rates and subsequent calculations. The Agreement will specify clearly which activities are performed for which sums.
All Services supplied by the Contractor shall be performed on the basis of a best efforts obligation unless and insofar as the Contractor has expressly promised a result in the Written Agreement and the result concerned is also described in a sufficiently precise way.
The Contractor provides no guarantees concerning results unless agreed otherwise in the offer by means of a Service Level Agreement (SLA) in which results are specified. To the extent not provided for otherwise in an applicable SLA, the provisions of this article shall apply. The Contractor shall undertake to ensure that requests of the Client are executed as quickly as possible, but cannot give any firm deadlines. This shall apply to a deadline for scheduling and performing planned activities and also to response times and times for repairs where there is a request for the adjustment, repair and/or improvement of a Service and/or Materials.
Article H.2. Term
H.2.1 The Agreement shall be entered into by the Client for a minimum term of twelve (12) months. Hereafter the Agreement shall be continued indefinitely. At the end of the minimum term, the Agreement may be terminated by either party giving at least one (1) month’s notice. Notice to terminate the Agreement given by either the Client or the Contractor must be given in Writing.
Article H.3. Specifications and Client Cooperation
If agreed, the Contractor shall install and configure the Materials on hardware and networks to be indicated by the Client. The Client shall be obliged to do everything that is reasonably necessary and desirable to enable the timely and proper installation and functioning of the Materials. In particular, the Client shall ensure that all information which the Contractor has stated to be required or with regard to which the Client can reasonably understand that it is required for the supply of the Materials, is made available to the Contractor in time.
At the Contractor’s request, the Client shall allow Employees and agents of the Contractor all necessary access to the computer systems concerned to facilitate installation, configuration, maintenance and adjustments of the Materials. Physical access to those systems shall take place only where such is necessary, and only after prior consultation with the Client.
The selection, purchase and management of the hardware and networks to be used is the sole and complete responsibility of the Client. The Contractor shall give instructions regarding the configuration required. If the designated hardware and networks do not meet the Contractor’s requirements, the Contractor shall be entitled to refuse installation or configuration.
Article H.4. Updates and improvements
Only where such is part of the Agreement will the Contractor undertake to ensure that the Materials are adjusted from time to time to improve functionality and remedy faults, whether or not on the basis of instructions and requests of the Client or at its own initiative, where such is specified in the Agreement.
Only where such is part of the Agreement will the Contractor undertake to ensure that the Materials are kept up-to-date. However, the Contractor will in many cases be reliant on its supplier or suppliers and third parties. The Contractor shall be entitled not to install certain updates or patches if it believes such will be detrimental to the proper functioning of the software or will not be in the interest of the Service.
The Contractor shall undertake to ensure that the changes and new functionality requested by the Client are added to the Materials. The Contractor shall at all times be entitled to refuse any such request where it believes such to be impracticable or liable to impede the proper functioning or availability of the Materials. Costs are associated with the Client’s request to have changes and new functionality added to the Materials. The
Contractor shall notify the Client of those costs in advance.
Where an application, update or patch results in changed functionality within a Service or Project already developed which has a major impact on the functioning of other Materials, systems, etc., the Contractor and the Client shall discuss the consequences thereof. If a decision is made to implement that change, update or patch, the Contractor shall be entitled to invoice the hours spent separately based on actual costs.
Where the Client wishes to implement a change to the Materials independently, such shall take place entirely at the Client’s own risk and responsibility. In such a case, the Contractor shall not have to, or shall no longer have to, undertake to ensure that bugs or errors are remedied. All the foregoing applies unless the Client has notified the Contractor of the change required in advance and the Contractor has approved it in Writing. The Contractor may attach conditions to that approval.
Unless agreed otherwise, the provision of support to end users (customers of the Client) shall not be included.
Article H.5. Remote support
Remote support is supplied by telephone, email and other channels to be agreed jointly.
At the Client’s request, the Contractor shall suggest software that enables computers to be accessed remotely. It is the Client’s responsibility to ensure that its network and security environment allows such software to work.
Where it turns out that remote support is not resulting in a satisfactory solution or is impracticable in view of the nature of the problem, the Contractor shall enter into consultations with the Client to find a solution on site.
The Contractor may be contacted between 09:00 and 17:00 on working days (Monday to Friday inclusive, with the exception of public holidays recognised in the Netherlands and official holidays) for remote support (and also for scheduling maintenance and remedying faults).
Module I. Advice and courses
This Module applies to Contractors performing consultancy activities and/or providing training sessions or courses.
Article I.1. Specific provisions for training sessions and courses
Where the Agreement (also) extends to arranging a course or training session (hereinafter: course) by the Contractor, the provisions of this Article shall be applicable to those arrangements.
The Contractor may hold various courses.
Course shall mean: a course, workshop, training programme, lecture or training session arranged or offered by the Contractor.
General course shall mean: a course arranged at the initiative of the Contractor intended for several parties.
Internal course shall mean a course arranged at the Client’s request, at its site and aimed at its employees.
Unless agreed otherwise, a separate fee shall be payable for course material in addition to the fee payable for the course.
In the case of an internal course, the Client shall be responsible for providing the facilities required by the Contractor (including in any case sufficient space for the course to be held, computers, projectors, an internet connection, refreshments) for the course, and for handling registrations and de-registrations.
In the case of a general course, the Contractor shall arrange the facilities required for the general course concerned.
In the case of an internal course, the Client shall be entitled, up to fourteen (14) calendar days before the (first) date of the course, to cancel the course or to postpone it. Any cancellation or postponement costs for facilities already booked (including travel expenses or hotel overnight stay expenses for lecturers) shall be payable by the Client.
In the case of a general course, participation shall take place on a first come, first served basis. The Contractor shall confirm registration, or refuse it, giving reasons, by email. Where the Client’s application to register for a course does not reach the Contractor until after the maximum number of participants on the course has been reached, the Contractor shall keep the application to register and accept it later if another participant drops out. The Contractor shall provide timely notification of this.
The Client shall determine itself whether the course is suitable for the participants or whether to participate in the course. The absence of the required prior knowledge on the part of the Client or its employees is no reason to cancel and shall not mean that obligations arising from the Agreement and/or the General Terms and Conditions cease to apply.
The Contractor shall be permitted to change the content, location and dates or times of the general course. The Client shall be notified of any changes by no later than two (2) weeks before the start of the general course.
The Client shall be entitled to cancel participation up to five (5) working days before the (first) date of the general course. In such a case, the price for participation shall be waived. In the event of cancellation within five
(5) working days, the agreed price shall remain payable. The Client shall be entitled to register a replacement up to and including the (first) day of the general course; this shall not be regarded as a cancellation.
Payment shall take place by advance payment, made before the course starts.
Article I.2. Specific provisions concerning advice
Where the Agreement (also) extends to the Contractor performing consultancy services, the provisions of this article shall apply.
Unless agreed otherwise in Writing, the Contractor gives no guarantee as regards delivery times and/or turnaround times. Activities are or will be performed on working days, not being Saturdays, Sundays or a generally
recognised public holiday, between 09:00 and 17:00.
Where it has been agreed that the activities will be performed in phases, the Contractor shall be entitled to postpone implementation of the next phase until the Client has approved the Materials and the associated results.
The use of results, Materials or other findings generated by the Services and activities shall be at the risk and responsibility of the Client at all times.
Where and insofar as the proper implementation of the Agreement so requires, the Contractor shall be entitled to arrange for specific activities to be performed by third parties. Any (additional) costs associated therewith shall be payable by the Client. Naturally, the latter action shall require the Client’s approval.
The Client shall use the results supplied by the Contractor for the agreed purpose only. Specifically, the Client shall use the texts prepared by the Contractor only for the purposes specified in the Agreement. Moreover, in such a case, the Contractor shall be entitled to withdraw the licence for use. Article A.10 shall apply by analogy.
Where necessary, the Contractor shall inform the Client of the status of the activities and the progress made. More detailed arrangements concerning the number of opportunities for contact and the manner in which they will take place may be laid down in the Agreement. These may include interim reports. The Parties shall appoint contact persons to facilitate this process and ensure it runs smoothly.
Notwithstanding the provisions of article A.6, the Contractor shall be entitled, including before activities start, to invoice a sum and postpone implementation of the Agreement until the first payment has been received by the Contractor.
Powered By ClickFunnels.com